Encore EW32FS481V User Manual

BELT-DRIVE WALK BEHIND MOWER
29
CHECK TIRE PRESSURES
Service Interval: Every 40 hours
1. Stop engine, wait for all moving parts to stop
and remove key. Engage parking brake.
2. Inflate drive tires to 12 psi.
3. Inflate caster tires to 20 psi.
CHECK CONDITION OF BELTS
Service Interval: Every 40 hours
1. Stop engine, wait for all moving parts to stop
and remove key. Engage parking brake.
2. Look on the top side of the cutting deck to
check the mower blade drive belt condition.
3. Look under the engine deck to check the pump
drive belt condition.
4. Check all idler arms to be sure they pivot freely.
LUBRICATE GREASE FITTINGS
Note: See chart for service intervals.
1. Stop engine, wait for all moving parts to stop
and remove key. Engage parking brake.
2. Lubricate fittings with NGLI #2 multi-purpose
grease.
Lubrication Chart
FITTING
LOCATIONS
INITIAL
PUMPS
NUMBER
OF
PLACES
SERVICE
INTERVAL
1. Deck Belt
Idler Arm
1
1
Every 40
Hours
2. Front Caster
Wheel Hubs
1
2
Every 40
Hours
3. Transmission
Couplers
1
2
Yearly
4. Brake Levers
Pivots
1
2
Yearly
5. Front Caster
Pivots
1
2
Yearly
CHECK SPARK PLUGS
Service Interval: As required
Remove spark plugs, check condition and reset
gaps, or replace with new plugs. See Engine
Owner’s Manual.
COPPER-BASED ANTI-SEIZE
Copper-based anti-seize can be used in the
following locations:
1. On threads of Blade Bolts. See Check Mower
Blades section.
2. Between engine crankshaft, pump drive
sheave, and clutch.
DIELECTRIC GREASE
Dielectric grease can be used on all blade type
electrical connections to prevent corrosion and loss
of contact.

Encore EW32FS481V Specifications

General

Brand	Encore
Model	EW32FS481V
Category	Lawn Mower
Language	English