BELT-DRIVE WALK BEHIND MOWER
25
RECOMMENDED MAINTENANCE SCHEDULE(S)
Maintenance Service Interval
• Check the engine oil level
• Check the mower blades
• Check the safety interlock system
• Check for loose hardware
• Check for belt obstructions
• Check for fuel and oil leakage
• Clean the engine and exhaust system area
• Clean the grass and debris build-up from the machine and
cutting deck, including under the deck
After the first 100 hours
• Torque the wheel lug nuts
• Clean the dust and dirt from cylinder and cylinder head fins
• Clean the spark plugs, check and adjust gap if necessary
• Check the condition of the belts
• Check the tire pressures
• Grease the caster wheel bearings
• Grease the deck belt idler arm bearing
• Change the engine oil filter
• Replace the primary air cleaner
• Check the secondary air cleaner – replace if dirty. See the
Engine manual for additional information
• Torque the wheel lug nuts
• Replace the secondary air cleaner. See the Engine manual
for additional information.
• Check the battery charge
• Grease the front caster pivots
• Grease the brake lever pivots
• Grease the transmission output shaft couplers