Need help?Do you have a question about the Endless Pools Pools and is the answer not in the manual?
Bolt panels together, leaving access for service and options.
Assemble the 6 wall panels on a level concrete slab.
Anchoring panels for deeper pools, not using tension straps.
Installing reinforcing channels over the top flanges of long sides.
Using tension straps when not anchoring to concrete.
Installing the aluminum liner hanger around the pool perimeter.
Attaching the valve assembly to the front panel for water current control.
Using bullnose coping for in-ground pools, acts as liner hanger.
Finishing indoor pools with a 9-3/4" wide waterproof edge.
Convenient method to finish the top edge, acts as liner hanger.
Protects children/pets, maintains temperature and humidity.
Provides a solar blanket for temporary cover or pool heating.
Adds jets for therapy benefits alongside swim current.
Aesthetic lighting option typically located on side or end walls.
Plumbed to hydraulic line to read pressure correlating with swim current speed.
Provides seven low-rise steps for gradual entry into the pool.
Helps with stroke technique and makes workouts more enjoyable.
Recommends installing for potential lower electricity rates for the heater.
A less expensive alternative for heating the pool when available.
Recommends insulating with rigid foam to conserve heat and reduce costs.
Cutting holes in liner and installing fittings for jets, lights, and water returns.
Connecting fittings and plumbing the water quality system (pump, filter, heater).
Connecting the water quality system components to power and timer.
Installing the power unit and ensuring proper bonding and grounding of electrical equipment.
Installing hydraulic hoses and adding the specified fluid to the power unit.
Completing installation, checking for leaks, and initial water chemistry.
General| Brand | Endless Pools |
|---|---|
| Model | Pools |
| Category | Swimming Pool |
| Language | English |
To Next Page
