Endress+Hauser iTHERM TM411 - Page 25

iTHERM TM412
Endress+Hauser 25
TA30A Specification
107.5 (4.23)
68.5 (2.7)
28
(1.1)
78 (3.1)
15.5 (0.6)
A0009820
• Protection class:
– IP66/68 (NEMA Type 4x encl.)
– For ATEX: IP66/67
• Temperature: –50 to +150 °C (–58 to +302 °F) without cable
gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Threaded cable entry: G ½", ½" NPT and M20x1.5;
• Protection armature connection: ½" NPT, M24x1.5
• Head color: blue, RAL 5012
• Cap color: gray, RAL 7035
• Weight: 330 g (11.64 oz)
• Ground terminal, internal and external
• Available in conjunction with 3-A marked sensors
TA30A Specification
107.5 (4.23)
91.6 (3.61)
28
(1.1)
78 (3.1)
15.5 (0.6)
A0009821
• Protection class:
– IP66/68 (NEMA Type 4x encl.)
– For ATEX: IP66/67
• Temperature: –50 to +150 °C (–58 to +302 °F) without cable
gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Threaded cable entry: G ½", ½" NPT and M20x1.5
• Protection armature connection: ½" NPT, M24x1.5
• Head color: blue, RAL 5012
Cap color: gray, RAL 7035
• Weight: 420 g (14.81 oz)
• With TID10 display
• Ground terminal, internal and external
• Available in conjunction with 3-A marked sensors
TA30D Specification
107.5 (4.23)
110 (4.3)
28
(1.1)
78 (3.1)
15.5 (0.6)
A0009822
• Protection class:
– IP66/68 (NEMA Type 4x encl.)
– For ATEX: IP66/67
• Temperature: –50 to +150 °C (–58 to +302 °F) without cable
gland
• Material: aluminum, polyester powder coated
Seals: silicone
• Threaded cable entry: G ½", ½" NPT and M20x1.5
• Protection armature connection: ½" NPT, M24x1.5
• Two head transmitters can be mounted. In the standard
version, one transmitter is mounted in the terminal head
cover and an additional terminal block is installed directly
on the insert.
• Head color: blue, RAL 5012
• Cap color: gray, RAL 7035
• Weight: 390 g (13.75 oz)
• Ground terminal, internal and external
• Available in conjunction with 3-A marked sensors