Endress+Hauser Liquistation CSF34 - Page 26

Electrical connection Liquistation CSF34
26 Endress+Hauser
5.1.7 Cable terminals
Plug-in terminals for Memosens and PROFIBUS/RS485 connections
‣
Press the screwdriver against the
clip (opens the terminal).
‣
Insert the cable until the limit stop.
‣
Remove the screwdriver (closes the
terminal).
After connection, make sure that every cable end is securely in place. Terminated cable
ends, in particular, tend to come loose easily if they have not been correctly inserted as
far as the limit stop.
All other plug-in terminals
‣
Press the screwdriver against the
clip (opens the terminal).
‣
Insert the cable until the limit stop.
‣
Remove the screwdriver (closes the
terminal).