Endress+Hauser Liquistation CSF34 User Manual (English)

Other manuals for Endress+Hauser Liquistation CSF34

Questions and Answers:

B
Bruce ZhangAug 7, 2025
What to do if controller signals are not accepted or outputs do not switch in Endress+Hauser Liquistation CSF34 Laboratory Equipment?
- T
  Troy GonzalezAug 7, 2025
  If the controller signals are not being accepted or the outputs are not switching on your Endress+Hauser Laboratory Equipment, the issue might stem from an incorrect program setting, incorrect wiring, or an electronics failure. To resolve this, check the program settings and wiring. If these steps don't work, replace the base module.
L
Leslie AlvarezAug 14, 2025
How to fix a dark display on Endress+Hauser Laboratory Equipment?
- A
  Amanda StoneAug 15, 2025
  If your Endress+Hauser Laboratory Equipment display is dark, it could be due to no supply voltage or a defective base module. First, check if the supply voltage is applied. If the display remains dark, replace the base module.
A
Allen RussellAug 22, 2025
What to do if the display does not change or the device cannot be operated on Endress+Hauser Liquistation CSF34 Laboratory Equipment?
- T
  Trevor McknightAug 22, 2025
  If values appear on the display of your Endress+Hauser Laboratory Equipment, but the display doesn't change or the device cannot be operated, the module might not be wired correctly or the operating system condition is impermissible. Check the modules and wiring. If the problem persists, switch off the device and switch it on again.
A
Alexander AlvarezAug 29, 2025
Why am I getting implausible measured values from Endress+Hauser Laboratory Equipment?
- J
  Julie EverettAug 30, 2025
  If you're getting implausible measured values from your Endress+Hauser Laboratory Equipment, it might be due to defective inputs. First perform tests and take measures as outlined in "Process-specific errors" section. To test the measuring input, connect the Memocheck Sim CYP03D to the input and use it to check the function of the input.

Endress+Hauser Liquistation CSF34 Specifications

General

Protection Class	IP55
Sample types	Liquid
Housing material	Stainless steel
Cooling	Optional Peltier cooling
Control Unit	Integrated
Measurement Parameters	temperature
Sampling Frequency	Time-controlled, event-controlled
Communication Protocols	Modbus
Communication	Digital outputs
Power Supply	100 to 240 V AC, 50/60 Hz
Operating Temperature	-20 to 50 °C
Process Connection	Hose
Output Signal	4-20 mA, digital signals
Ambient Temperature	-20 to 50 °C
Process Temperature	0 to 40 °C
Material	Stainless steel
Certifications	CE