Endress+Hauser Liquistation CSF34 - Connecting the Sampler Controller

Liquistation CSF34 Electrical connection
Endress+Hauser 27
5.2 Connecting modules and sensors
5.2.1 Connection compartment in the controller housing
A0012843
1
2
A0042244
1 1 E base module
2 Sampler controller
The controller housing has a separate connection
compartment. Release the six cover screws to open the
connection compartment:
‣
Release 6 cover screws with a Phillips screwdriver to
open the display cover.
Display cover open, version with base module E