Endress+Hauser Micropilot FMR50 - Page 46

Micropilot FMR50
46 Endress+Hauser
Example for the design of a bypass
B
5
A-A
1
100%
0%
A A
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
4
4
2
C
3
3
≤
1 (0.04)
A0019010
A Micropilot FMR50/FMR51/FMR52/FMR54: horn 80 mm (3")
B Full bore ball valve
C Minimum distance to upper connecting pipe: 400 mm (15.7 in)
1 Marking for axial alignment
2 e.g. welding neck flange DIN2633
3 Diameter of connecting pipes as small as possible
4 Do not weld through the pipe wall; the inside of the pipe must remain smooth.
5 Opening diameter of ball valve must always correspond to the pipe diameter. Avoid edges and constrictions.