Endress+Hauser Micropilot FMR50 - Certificates and Approvals; RCM-Tick Marking; Functional Safety

Micropilot FMR50
86 Endress+Hauser
Adjustable flange seal for FMR50/FMR56
Accessories Description
Adjustable flange seal for
FMR50/FMR56
h
2
3
1
4°
øD
ød
h
max
h
min
±8°
A0018871
1 UNI slip-on flange
2 Adjustable flange seal
3 Nozzle

The material properties and process conditions of the adjustable flange seal must be compatible with the properties
(temperature, pressure, resistance) of the process.
Technical data: version DN/JIS
Order number 71074263 71074264 71074265
Compatible with DN80 PN10/40 DN100 PN10/16 • DN150 PN10/16
• JIS 10K 150A
Recommended screw length 100 mm (3.9 in) 100 mm (3.9 in) 110 mm (4.3 in)
Recommended screw size M14 M14 M18
Material EPDM
Process pressure –0.1 to 0.1 bar (–1.45 to 1.45 psi)
Process temperature –40 to +80 °C (–40 to +176 °F)
D 142 mm (5.59 in) 162 mm (6.38 in) 218 mm (8.58 in)
d 89 mm (3.5 in) 115 mm (4.53 in) 169 mm (6.65 in)
h 22 mm (0.87 in) 23.5 mm (0.93 in) 26.5 mm (1.04 in)
h
min
14 mm (0.55 in) 14 mm (0.55 in) 14 mm (0.55 in)
h
max
30 mm (1.18 in) 33 mm (1.3 in) 39 mm (1.45 in)