Micropilot FMR51, FMR52
Endress+Hauser 19
Block Content Number of
permanent
blocks
Number of
instantiable
blocks
Execution
time
Functionality
Integrator
Block
The Integrator Function Block
integrates a variable as a function
of the time or accumulates the
counts from a Pulse Input block.
The block may be used as a
totalizer that counts up until reset
or as a batch totalizer that has a
setpoint, where the integrated or
accumulated value is compared to
pre-trip and trip settings,
generating discrete signals when
these settings are reached.
1 1 25 ms standard
Analog Alarm
Block
1 1 25 ms standard
Up to 20 blocks can be instantiated in the device altogether, including the blocks already
instantiated on delivery.
To Next Page
Loading...
