Micropilot FMR51, FMR52
92 Endress+Hauser
In addition, the devices FMR50
8)
, FMR51
9)
, FMR52
10)
, FMR56 and FMR57 are compliant with the
LPR (Level probe radar) regulation also for free space applicactions according to the FCC Code of
Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207, 15.209, 15.256 for antenna sizes
bigger than 50 mm (2.0 in)
11)
. For these applications the devices must be professionally installed in
a downward operating position. In addition, the devices are not allowed to be mounted in a zone of
4 km around RAS stations and within a radius of 40 km around RAS stations the maxium operation
height of devices is 15 m (49 ft) above ground.
Japanese radio approval
The devices FMR50, FMR51, FMR52, FMR54 and FMR57 comply with the Japanese Radio Law,
Article 6, Section 1(1).
CRN approval
Some device versions have a CRN approval. Devices are CRN approved if the folowing two conditions
are met:
• The device has a CSA approval (Product structure: Feature 010 "Approval")
• The device has a CRN approved process connection according to the following table.
Feature 100 of the product structure Process connection
AFJ NPS 2" Cl.150 RF, 316/316L
AFK NPS 2" Cl.150, PTFE >316/316L
AFM NPS 2" Cl.150, AlloyC >316/316L
AGJ NPS 3" Cl.150 RF, 316/316L
AGK NPS 3" Cl.150, PTFE >316/316L
AGM NPS 3" Cl.150, AlloyC >316/316L
AHJ NPS 4" Cl.150 RF, 316/316L
AHK NPS 4" Cl.150, PTFE >316/316L
AHM NPS 4" Cl.150, AlloyC >316/316L
AJJ NPS 6" Cl.150 RF, 316/316L
AJK NPS 6" Cl.150, PTFE >316/316L
AJM NPS 6" Cl.150, AlloyC >316/316L
ARJ NPS 2" Cl.300 RF, 316/316L
ARM NPS 2" Cl.300, AlloyC >316/316L
ASJ NPS 3" Cl.300 RF, 316/316L
ASM NPS 3" Cl.300, AlloyC >316/316L
ATJ NPS 4" Cl.300 RF, 316/316L
ATM NPS 4" Cl.300, AlloyC >316/316L
MRK DIN11851 DN50 PN25 slotted nut, PTFE>316L
MTK DIN11851 DN80 PN25 slotted nut, PTFE>316L
RGJ Thread ANSI MNPT1-1/2, 316L
RVJ Thread EN10226 R1-1/2, 316L
TDJ Tri-Clamp ISO2852 DN40-51 (2"), 316L
TDK Tri-Clamp ISO2852 DN40-51 (2"), PTFE>316L, 3A, EHEDG
TFJ Tri-Clamp ISO2852 DN70-76.1 (3"), 316L
8) Except of FMR50-######BM* (Horn 40mm/1-1/2", PVDF encapsulated)
9) Except for FMR51-######BA* (Horn 40mm/1-1/2") and FMR51-######BB* (Horn 50mm/2")
10) Except for FMR52-######BO* (Horn 50mm/2", flush mount)
11)
To Next Page
Loading...
