Endress+Hauser Micropilot FMR52 - Page 65

Micropilot FMR51, FMR52
Endress+Hauser 65
FMR51: Version T ≤ 150 °C (302 °F); with antenna extension
A
R
L
68 (2.68)
26 (1.02)
5 (0.2)
100(3.94)
ød
55
B
C
L
63 (2.48)
b
5 (0.2)
100(3.94)
ød
øD
øA
D E
63
(2.48)
68
(2.68)
b
47 (1.85)
ød
øD
101...1000
(3.98...39.3)
L2
ø27(1.06)
ø42.5(1.7)
55
26 (1.02)
A0023384
 24 MR51: Version T < 150 °C (302 °F); with antenna extension; dimensions: mm (in)
A Process connections: Thread; Accessory mounted: 100mm/4" antenna extension
B Prozessanschluss: Tri-Clamp ISO2852; Accessory mounted: 100mm/4" antenna extension
C Process connection: Flange 316L; Accessory mounted: 100mm/4" antenna extension
D Process connection: Thread; Accessory mounted: ..... mm/inch antenna extension
E Process connection: Flange 316L;Accessory mounted: ..... mm/inch antenna extension
R Reference point of the measurement
Valid for the following device versions
• Feature 090 "Seal":
– A5: Viton GLT
– C1: Kalrez
• Feature 610 "Accessory mounted"
– OM: 100mm/4" antenna extension (diagrams A, B, C)
– OU: ..... mm antenna extension (101 ... 1000 mm) (diagrams D, E)
– OV: ..... inch antenna extension (3,98 ... 39,3 in) (diagrams D, E)
• Dimensions of the horn antenna (L, L2, ⌀d): →  68
• Dimensions of the process connections (⌀A, ⌀D, b): →  68