Endress+Hauser Micropilot FMR52 - Page 78

Micropilot FMR51, FMR52
78 Endress+Hauser
Pos. Part Material
Nordlock washer
(extension >100 mm, XT and HT
version)
A4 without Nordlock
washer
Process separation cone Standard:
PTFE
XT:
PEEK
HT:
Al
2
O
3
Seal Standard:
• Viton: FKM
• Kalrez: FFKM
(K6375)
XT:
Graphite
HT:
Graphite
3 Flange 316L (1.4404/1.4435) optionally AlloyC22 (2.4602) clad
4 Tube extension + adapter 316L (1.4404)
5 Extension process adapter 316L (1.4404)
Locking washer
6 Process adapter 316L (1.4404)
7 Housing adapter 316L (1.4404)
Temperature reduction (XT) 316L (1.4404)
Intermediate adapter (HT) 316L (1.4404)
Process adapter 316L (1.4404)
FMR52
A
B C
1
2
4 4 4
2 3
1
1
A0018951
A Dairy coupling
B Clamp adapter
C Flange version
Pos. Part Material
1 Adapter 304 (1.4301)
2 Process connection 316L (1.4435)
3 Flange 316L (1.4404/1.4435)
4 Cladding PTFE
(in accordance with FDA 21 CFR 177.1550 and USP <88>
Class VI)