Endress+Hauser Micropilot FMR52 - Post-connection Check

Micropilot FMR51, FMR52 PROFIBUS PA Commissioning (via operating menu)
Endress+Hauser 41
9.1.3 Opening the context menu
Using the context menu, the user can call up the following menus quickly and directly from
the operational display:
• Setup
• Conf. backup disp.
• Simulation
Calling up and closing the context menu
The user is in the operational display.
1. Press  for 2 s.
 The context menu opens.
XXXXXXXXXX
kg/h
20.50
Setup
Conf.backupdisp
Simulation
A0014003-EN
2. Press  +  simultaneously.
 The context menu is closed and the operational display appears.
Calling up the menu via the context menu
1. Open the context menu.
2. Press  to navigate to the desired menu.
3. Press  to confirm the selection.
 The selected menu opens.