Commissioning (via operating menu) Micropilot FMR53, FMR54 HART
60 Endress+Hauser
10.2 Operating menu
Parameter/Submenu Meaning Description
Language
1)
Defines the operating language
of the on-site display.
BA01150F (FMR53/FMR54, HART)
Setup When appropriate values have
been assigned toall setup
parameters, the measured
should be completely configured
in a standard application.
Setup → Mapping Interference echo suppression
Setup → Advanced setup Contains further submenus and
parameters:
• to adapt the device to special
measuring conditions.
• to process the measured
value (scaling, linearization).
• to configure the signal
output.
Diagnostics Contains the most important
parameters needed to detect
and analyze operational errors.
Expert
2)
Contains all parameters of the
device (including those which
are already contained in one of
the above submenus). This
menu is organized according to
the function blocks of the
device.
GP01014F/00/DE (Description of Device
Parameters, FMR5x, HART)
1) In case of operation via operating tools (e.g. FieldCare), the "Language" parameter is located at "Setup → Advanced
Setup → Display"
2) On entering the "Expert" menu, an access code is always requested. If a customer specific access code has not been
defined, "0000" has to be entered.
To Next Page
Loading...
