Endress+Hauser NAR300-13 Series - Float Sensor NAR 300

Oil Leak Detector NAR 300 system
20 Endress+Hauser
5.1 Float Sensor NAR 300
5.1.1 Handling Instructions
Do not carry the float sensor by holding the cable as below fig.
When carrying it, please make sure to hold it with both hands.
When lifting and holding the sensor, take care not to remove the top cover.
5.1.2 Float guide mounting
The Float Sensor NAR 300 can install in the float guide for our existing products (CFD10, CFD30,
UFD10, NAR291, NAR292)
Do not hold and pull this parts
Do not rotate the housing
200
350
200
250
10
200
10
L
10
260
Nut M10
Float Guide
Two holes for Guide
Weight
5 Installation