13
Certificates and approvals
CE mark The device meets the statutory requirements of EC directives.
Endress+Hauser confirms the successful testing of the device by affixing the CE mark.
Ex approval The Endress+Hauser sales office will provide you with information on the currently suppliable
Ex versions (ATEX EEx ia; FM IS; CSA IS)
All data relevant for explosion protection can be found in separate Ex documentation
(see: Supplementary Documentation). This can be requested as necessary.
Protection type [EEx ia] IIC
Overspill protection WHG
External standards and
guidelines
Compliance with external standards and guidelines in the design and development of the
Nivotester FTL 325 P.
• EN 60529
Type of ingress protection for housing (IP Code)
• EN 61010
Safety specifications for electrical measurement, control and laboratory instruments
• EN 61326
Interference emission (Class B apparatus), interference immunity (Appendix A - Industry)
• IEC 61508
Functional safety of safety-relevant electrical/electronic/programmable electronic systems
(E/E/PES)
DIN V 19250
Fundamental Safety aspects for measurement and control equipment
Functional safety SIL1 / SIL2 / SIL3 or Ak 2...6 connected with FEL 57 for protection functions as overspill protection!
Ordering information
Nivotester FTL 325 P
10 Certificates
F ATEX II (1) GD [EEx ia] IIC, Overspill protection to WHG
H ATEX II (1) GD [EEx ia] IIC, Overspill protection to WHG, SIL2 (IEC 61508)
O FM IS Cl. I, II, III Div.1 Group A-G
P FM IS Cl. I, II, III Div.1 Group A-G, SIL2 (IEC 61508)
S CSA IS Cl. I, II, III Div.1 Group A-G
T CSA IS Cl. I, II, III Div.1 Group A-G, SIL2 (IEC 61508)
V * TIIS, Ex ia IIC
W * TIIS, Ex ia IIC, SIL2 (IEC 61508)
20 Version
1 Top-hat rail installation 1-channel 22.5 mm
3 Top-hat rail installation 3-channel 45 mm
9 Special design
30 Voltage supply
A Power supply 85... 253 V AC, 50/60 Hz
E Power supply 20... 30 V AC / 20... 60 V DC
Y Special design
40 Output
1 1x level SPDT + 1x alarm SPST
3 3x level SPDT + 1x alarm SPST
9 Special design
FTL 325 P Complete product designation