Endress+Hauser nivotester FTL 325 P - Page 5

5
L00-FTL325Px-14-06-xx-xx-004
L00-FTL325Px-14-06-xx-xx-005
L00-FTL325Px-14-06-xx-xx-006
!
Note!
As CH1 is not used, the alarm must be switched to "off"!
3. When channels CH2 and Ch3 are used for two-point control ∆s and channel CH1 for overspill
protection, the measuring device consists of:
– 3 measuring sensors
– 3-channel Nivotester
– control or signal devices
4. When channel CH2 is used for measuring the level limit with two level limit relays and channel
CH1 is used for measuring other level limits, the measuring device consists of:
– 2 measuring sensors
– 3-channel Nivotester
– control or signal devices
5. When channel CH2 is used for measuring the level limit with two level limit relays, the
measuring device consists of:
– 1 measuring sensor
– 3-channel Nivotester
– control or signal devices
CH2
CH1
CH3
FTL 325 P-#3#3
∆s
E
X
E
X
WHG SIL
E
X
E
X
CH2
CH3
CH1
FTL 325 P-#3#3
E
X
E
X
CH2
CH3
CH1
FTL 325 P-#3#3