Endress+Hauser RIA452 - Page 28

Commissioning RIA452
28 Endress+Hauser
Min operating mode
G09-RIA452ZZ-15-00-xx-en-001
Fig. 14: Min operating mode
The following parameters must be configured:
Max operating mode
G09-RIA452ZZ-15-00-xx-en-002
Fig. 15: Max operating mode
The following parameters must be configured:
Reset No
Yes
Resets the run time and switching frequency for this
limit value.
Simu relay Off
Low
High
Simulation of the selected limit value. Is automatically
set to Off when the menu item is exited.
Function
(menu
item)
Parameter setting Description
Menu Function (menu item) Setting value
LIMIT 1 to 8/M10 to 17 Function
Setpoint A
Hysteresis
Min
Value for threshold
Value for hysteresis