Endress+Hauser RIA452 - Page 38

Commissioning RIA452
38 Endress+Hauser
6.3.9 Linearization table - LIN. TABLE/M21
To linearize input variables, a linearization table can be saved in the measuring instrument,
e.g. to correct the level signal of a container for volume display.
Dec. point XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Number of digits after the decimal point for the min/
max value memory.
Min. value 0..99999 Displays the current minimum value in the memory.
Max. value 0..99999 Displays the current maximum value in the memory.
Reset min No
Yes
Resets the minimum value memory.
Reset max No
Yes
Resets the maximum value memory.
Function
(menu
item)
Parameter setting Description
Counts 2..32
2
Number of support points needed. At least two points
have to be entered.
Dimension XXXXXXXXX Select the dimension from the list or dimension as free
text (max. 9 characters long).
Dec. Y value XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Decimal point position for the Y-values in the
linearization table.
Del. points No
Yes
Delete all programmed support points.
Show points No
Yes
Show all programmed support points.
Function
(menu
item)
Parameter setting Description