Installation RIA452
8 Endress+Hauser
G09-RIA452xx-17-01-06-xx-001
Fig. 3: Installation in panel
1. Push the device with the sealing ring (item 1) through the panel cutout from the front.
2. Keep the device horizontal and suspend the two fixing clips (item 2) in the recesses
provided.
3. Tighten the screws of the fixing clips evenly with a screwdriver.
4. Remove the protective strip from the display.
The dimensions of the panel meter are provided in the "Technical data" section of the
Operating Instructions.
To Next Page
Loading...
