Installation
11
3.2.3 Mounting
L00-FMU90xxx-17-00-00-xx-001
A: Attaching the instrument to the rail B: Detaching the instrument from the rail
3.3 Installation check
After installing the device, carry out the following checks:
• Is the device damaged (visual inspection)?
• Does the device correspond to the measuring point specifications such as ambient temperature
etc?
• If available: Are the measuring point number and labelling correct?
• Is the instrument sufficiently protected against rainfall and direct sunlight?
• Is the instrument securely mounted to the DIN rail (visual inspection)?
a
b
EN 60715 TH 35x7,5
EN 60715 TH 35x15
A
B
b
a
To Next Page
Loading...
