Endress+Hauser Tankvision NXA820 - Tankvision Configuration; 7.1 Logging into the Tankvision System

Tankvision configuration
26
7 Tankvision configuration
7.1 Loggin into the Tankvision system
To integrate a Tankvision unit (i.e. a Tank Scanner NXA820, Data Concentrator NXA821 or Host
Link NXA822) into the network, proceed as follows:
1. Connect a laptop to the service port of the Tankvision unit. Make sure that the laptop is
configured to get a dynamic IP addresses from a DHCP server.
L00-NXA82xxx-04-00-00-yy-025
2. Open the internet browser and enter the following URL: http://192.168.1.1
The Tankvision login screen appears. The user ID (= User Login Name) and passwort are
defined by the system administrator when adding a user to the system (see BA339F/00/EN).
3. Login as Supervisor.
Enter ...
• ... "Super" into "User ID".
• ... "Super" into "Password".
• Click the "Login" button.
23
1
6
7
8
W&M
RESET
RESET
Alarm Relay
E
L+
L-
6
7
8
3
2
1
Fuse
POWER
10,5 ... 32V DC
2AT
10 11 12 13
10 11 12 13
MODBUS
Field Description
User ID Enter the appropriate user login name .
The user login name is alphanumeric and case sensitive.
Password Enter the appropriate password.
The user password is alphanumeric and case sensitive. It consists of 3 to 8 characters.
Options Click the "Options" button to display the connection options. Available options are "Local"
and "Remote". By default, the system selects the "Local" option. This allows the user to log
into the Tankvision system within the network (LAN). The "Remote" option allows the user
to log into the Tankvision system outside the network (Internet).