Tankvision configuration
29
4. Enter the appropriate information in the relevant fields.
!
Note!
– Parameters marked by an asterisk are mandatory.
– The required values of the parameters depend on your local network configuration. For more
information please contact your local network administrator.
– Detailed information on the individual fields can be found in BA339F, "Tankvision NXA820,
NXA821, NXA822 - Description of Instrument Functions".
5. Click the "Submit" button to proceed. The system displays a confirmation box as follows:
6. Click the "OK" button to proceed, or click the "Cancel" button to exit.
7. After saving the settings, Tankvision displays a confirmation message.
8. Disconnect the laptop and connect the Tankvision unit to the network using the System LAN
port. The Tankvision unit can now be operated from a computer within the LAN.
To Next Page
Loading...
