C) BELT MAINTENANCE
Inspect the Running belt monthly to check its condition. Look for loose pieces, tears
or extremely worn areas. If these conditions occur, replace the running belt
immediately. Please call Endurance Customer Support.
Proper Use
• DO NOT use this product unless proper attire is worn. Rubber-soled
training, running, or tennis shoes must be worn to provide proper traction
and protection while using this product.
• DO NOT use cleats, spikes or any other non-athletic style shoes.
• DO NOT use this product while barefoot or wearing only socks.
INSTALLATION REQUIREMENTS
A) Electrical Requirements
Your Endurance™ treadmill is intended for use in the country to which it
was shipped. Electrical supplies outside of this country may differ and may
not be compatible with the product. Please consult Customer Support
before using the treadmill in a different country.
B) Space Requirements
When choosing a location for the treadmill, pick a location that is
unobstructed. The treadmill must have the following clearance. These
spacing requirements are mandatory for the safe use of the treadmill.
If an accident should occur, you must have sufficient space to move
away from the treadmill.
• Non-entry side of treadmill - Minimum of 8 inches (20cm)
• Entry side of treadmill - Minimum of 36" (90cm)
• Front of the treadmill - Minimum of 12 inches (30cm)
• Behind treadmill - Minimum of 6 feet (180cm)
14
To Next Page
Loading...