Enerdrive ePRO Plus Battery Monitor Owners Manual (Rev. 1.03)Page 30
A12
Temperature averaging lter. Speci es the noise lter setting at the temperature
sensor input. The default value of 1 will be ne for most applications. Only in case
of long temperature sensor cables and/or environments with extremely high RF
interference levels, it is advised to set this value to 2.
Default: 1 Range: 0 – 2 Step size: 1
All changed Function settings remain in the ePRO Plus’s internal memory. Even when
the supply voltage has been interrupted. This also applies to the stored Status and
History items.
To Next Page
