Enerdrive ePRO Plus Battery Monitor Owners Manual (Rev. 1.03)Page 36
Standards CE certi ed (EMC Directive
2014/30/EU) including EN50498
Automotive EMC
All speci
cations are subject to change without notice
When input +B1 is only used for supply and +B2 for main battery voltage measurement, the
input voltage range for the main battery is 1..70Vdc.
+/ 00A is the maximum rating for 20 minutes The continuous input current range is
+/
500A
Please act according to your local rules and do not dispose of your old products
with the normal household waste. The correct disposal of your old product
will help prevent potential negative consequences for the environment and
human health.
To Next Page
Loading...
