Energetics XT 1010 User Manual

23
FUNCTIONS
1. Calendar: Display the month, date and week.
2. Temperature: Display current room temperature from 10℃ to 60℃.
3. Clock: Display the current time.
4. Alarm: The monitor has the alarm function.
5. Scan: Display all functions value from SPEED- RPM- DIST-TIME-CAL-WATT-
PULSE.
6. Speed: Display current training speed. Maximum speed is 99.9 KM/H or
MILE/H.
7. RPM: Display current rotation per minute.
8. DIST: Accumulate the total distance form 0.00 up to 999.9 KM or Km or
Mile. Or users can preset the target distance they want to reach.
9. Time: Accumulate the workout time from 00:00 to 99:59. Or users can
preset the target time they want.
10. CAL: Accumulate the calories consumption from 0 to 999.9. Or users can
preset the target Calories they want to consume.
11. WATT: Accumulate the Watt consumption from 4.6W to 572.6W.
12. Pulse: Display the current heart rate in beats per minute.
13. T.H.R.: Users can preset their Target Heart Rate.
14. Body Fat Measurement: Display body fat ratio, body type and BMI.
15. Pulse Recovery: Check the condition of pulse recovery when stop
exercising.
16. Programs: There are 20 different programs of Manual, Preset Programs of
P1-12, Body Fat program, Target Heart Rate program, Heart Rate Control
and 4 users programs to choose for training.
Each program has 16 columns of loading bars and 8 bars in each column.
Each column represents 1 minute workout (without the change of time
value) and each bar represents 2 levels loading.
Operation Instructions
1. Power supply requirement: Ac adapter of output – 9V/1A.
2. The full LCD display will be shown with Bi sound at the same time after the
monitor is power on. After that the ODO and wheel size will be shown 2
seconds on the lower display.
3. Set up Calendar & Clock
Use up or down key to set the value while the number of year, month, date
and time is blinking then press Enter key to confirm each setting value.
(If users did not enter any value over 20 seconds, the display will proceed
with next step. At this time you can press MODE and RECOVERY keys for 2
seconds to enter setting of Calendar & Clock again.)
Calendar, room temperature and time will show out while stop exercising
and without pressing key over 256 seconds, and reset all the function value
to be zero.
Alarm
Use UP or DOWN key to set the value while the number of hour and minute
for alarm is blinking, press ENTER key to confirm each setting value. After
that press UP or DOWN key to have the alarm signal showing on the display
then press ENTER key to confirm it. Once the alarm is ringing, press any key
to stop it.

Energetics XT 1010 Specifications

General

Brand	Energetics
Model	XT 1010
Category	Elliptical Trainer
Language	English