What does mismatch voltage mean on Energic Plus Battery Charger?
If the Energic Plus Battery Charger displays a mismatch voltage error, it indicates problems in the voltage circuit. Turn the high frequency charger off, wait 5 seconds, and turn it back on. If the problem continues, contact your dealer.
What to do if Energic Plus Battery Charger shows high battery temperature?
If the Energic Plus Battery Charger indicates a high battery temperature, it means the battery temperature exceeds 55 °C. To resolve this: 1. Move the battery to a cooler location. 2. Ensure nothing is covering the battery, such as dust, dirt, or other objects. The high frequency charger will automatically restart once the battery temperature drops below 50 °C.
What does timeout mean on Energic Plus Battery Charger?
If the Energic Plus Battery Charger displays a timeout error, it means the first phase has ended due to a time-out. Check if the high frequency charger is suitable for the specified battery type and disconnect the battery.
Why is there a loss of output voltage in my Energic Plus Battery Charger?
If you're experiencing a loss of output voltage with your Energic Plus Battery Charger, it could be due to the battery being disconnected. Ensure the battery is properly connected to the high frequency charger. If the problem persists, contact your dealer.
What to do if Energic Plus Battery Charger indicates high temperature?
If your Energic Plus Battery Charger is showing a high temperature warning, this indicates an internal high temperature. To resolve this: * Completely power down the high frequency charger. * Ensure the high frequency charger is placed in a location that allows for sufficient cooling. * Verify that the ventilation is not obstructed, allowing for proper heat dissipation. If these conditions are met, restart the high frequency charger after 30 seconds. If the problem persists, contact your dealer.
What to do if Energic Plus Battery Charger identifies a thermal problem?
If the Energic Plus Battery Charger identifies a thermal problem, it means semiconductors are overheated. Check whether the cooling screw is still working properly.
What to do if CAN bus has stopped working on Energic Plus Battery Charger?
If the CAN bus has stopped working on the Energic Plus Battery Charger, it indicates a problem with the CAN communication. Verify the CAN bus communication.
What to do if Energic Plus Battery Charger says unavailable configuration has been selected?
If the Energic Plus Battery Charger indicates that an unavailable configuration has been selected, it means that an unavailable configuration has been selected. Check and adjust the selected configuration.
What to do if Energic Plus Battery Charger says there is a problem with the thermal sensor?
If the Energic Plus Battery Charger indicates a problem with the thermal sensor, it might be disconnected during the recharge or out of range. Verify the connection of the sensor. If the connection is correct, measure the temperature of the battery.
What to do if Energic Plus Battery Charger says there is a problem with the battery?
If the Energic Plus Battery Charger indicates a problem with the battery, it could be due to the battery being disconnected or not conforming with the high frequency charger. First, verify the connection. If the connection is correct, check the nominal voltage of your battery and see if it is compatible with the high frequency charger.
General| Number of batteries charged at once | 1-4 |
|---|---|
| Battery size(s) | AA, AAA |
| Battery type | Ni-Cd, Ni-MH |
| Charging Ports | Independent channels |
| Compatibility | AA, AAA NiMH, NiCd batteries |
| Protection Features | Overcharge Protection, Short Circuit Protection |
To Next Page
