Never set the relief valve to a higher pressure than the maximum
rated pressure of the pump. Higher settings may result in equipment
damage or personal injury. Do not remove relief valve.
To avoid personal injury keep hands and feet away from cylinder and
work piece during operation.
Do not handle pressurized hoses.
Escaping oil under pressure can penetrate the skin, causing serious
injury. If oil is injected under the skin, see a doctor immediately.
Danger icons are only used when your action or lack of action may
cause serious injury or even death.
Safety 2
Installation 4
Mounting 5
Use 6
Operation 7
Release locking 8
Valve operation 9
Disconnecting 10
Maintenance 11
Maximum pressure setting 12
Technical specifications 13
Troubleshooting 14
DVD with Instruction Manuals in PDF-format.
Please find the DVD enclosed in the back of
this manual.
Contents
2
Safety
Safety
Important Receiving Instructions
Visually inspect all components for
shipping damage. Shipping damage is not
covered by warranty. If shipping damage is
found, notify carrier at once. The carrier is
responsible for all repair and replacement
costs resulting from damage in shipment.
Safety Issues / Safety rst
Read all instructions, DANGER, WARNING
and CAUTION paragraphs carefully.
Follow all safety precautions to avoid
personal injury or property damage during
system operation.
Enerpac cannot be responsible for damage
or injury resulting from unsafe product use,
lack of maintenance or incorrect product
and/or system operation. Contact Enerpac
when in doubt as to the safety precautions
and operations.
If you have never been trained on high-pressure hydraulic
safety, consult your distribution or service center for a free
Enerpac Hydraulic safety course.
To Next Page
Loading...
Need help?
General
