5
010.1220.0719 01.21
1.4 Shipping
BEFx ventilator fan units are shipped on a pallet and
protected by packaging.
Do not place other products or items on top of the
packaging.
After unpacking, the product must be handled in a way to
prevent damage to the collars and the ventilator housing.
The door handle should never be used to lift or carry the fan.
If necessary, the access door can be removed to facilitate
transport.
The ventilator is shipped with the motor installed on the
access door with a dedicated motor controller.
If other components are shipped, they will appear on the
shipment packing list.
NOTE: All fans are shipped with a Field Junction Box
connected via exible conduit.
1.5 Accessories (Optional)
• MEC 24 Exhaust Control
• EBC 30/31 Modulating Pressure Control
• Proven Draft Switch PDS
1.6 Listings
UL705, Standard for Power Ventilators with special
consideration for venting lint-laden air from single or multiple
dryers and CSA 22.2 No. 113, Standard for Fans and
Ventilators.
CSA C22.2 NO. 113-12 Fans and Ventilators Edition 9 -
Revision Date 2012/10/01
UL 705 Standard for Power Ventilators Edition 6 - Revision
Date 2013/12/17
Complies with and meets Type B, Spark Resistant
Construction per AMCA standard 99-0401 classications of
Spark Resistant Construction.
1.7 Warranty
2-year factory warranty (see back cover). Complete warranty
conditions are available from ENERVEX Inc.
WARNING
Never use access door handle as a carrying
handle.
AVERTISSEMENT
N’utilisez jamais la poignée de la porte d’accès comme
poignée de transport.
WARNING
This duct fan shall be installed a minimum of
one meter from any accessible opening of the
duct.
AVERTISSEMENT
Ce ventilateur de conduit doit être installé au moins un
mètre d’une ouverture accessible du conduit.
To Next Page
Loading...
Need help?
General
