Enerwave ZWN-RSM2-PLUS User Manual

Smart Dual Relay Switch Module Engineering
Specifications
V1.0

Enerwave ZWN-RSM2-PLUS Specifications

General

Model	ZWN-RSM2-PLUS
Power Supply	120VAC, 60Hz
Frequency	908.42 MHz
Z-Wave Certification	Yes
Wireless Protocol	Z-Wave
Load Rating	15A
Range	Up to 100 feet
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	Up to 85% non-condensing

Summary

3 Familiarize yourself with Switch

3.1 Installation

Details the installation process for the Smart Dual Relay Switch Module, including wiring diagrams.

4 Security and non-Security features

4.1 Supported Security Levels

Lists security levels supported by the Z-Wave Plus product, including S0 and S2 authentication.

4.2 Commands List

Details Z-Wave command classes and their required security classes for communication.

5 All functions of each trigger

5.1 SmartStart

Explains SmartStart feature for easy Z-Wave network inclusion via QR code scanning.

5.2 Power on

Describes indicator behavior upon power on, both in and out of the Z-Wave network.

5.3 Short press Z-Wave Button three times

Details manual Z-Wave network inclusion and exclusion procedures using the Z-Wave button.

5.4 Reset Switch to factory default

Provides instructions for resetting the switch to its factory default settings.

6 Special Rule of Each Command

6.1 Basic Command Class

Explains how the Basic Command Class maps to the Switch Binary Command Class.

6.2 Z-Wave Plus Info Report Command Class

Details Z-Wave Plus version, role type, node type, and icon types.

6.3 Association Command Class

Provides an overview of association groups and their corresponding endpoints.

6.4 Indicator Command Class

Describes support for the Indicator Command Class, including IDs and properties.

6.5 Configuration Command Class

Details configuration parameters like power on status and child lockout.