Enerwave ZWN-RSM2-PLUS - 4 Security and non-Security features; 4.1 Supported Security Levels; 4.2 Commands List

4
This device is a security enabled Z-Wave Plus
TM
product that is able to use encrypted Z-Wave Plus
messages to communicate to other security enabled Z-Wave Plus products.
When a node includes into a S0/S2 Z-Wave network, the node supports S0/S2 unauthenticated class,
S0/S2 authenticated and so do the supported CCs.
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of
vendor to increase reliability of the network.
4.1 Supported Security Levels
⚫ SECURITY_KEY_S0_BIT
⚫ SECURITY_KEY_S2_AUTHENTICATED_BIT
⚫ SECURITY_KEY_S2_UNAUTHENTICATED_BIT
4.2 Commands List
Command Classes
Version
Required Security Class
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
2
None
COMMAND_CLASS_TRANSPORT_SERVICE_V2
2
None
COMMAND_CLASS_SECURITY_V1
1
None
COMMAND_CLASS_SECURITY_2_V1
1
None
COMMAND_CLASS_SUPERVISION_V1
1
None
COMMAND_CLASS_APPLICATION_STATUS_V1
1
None
COMMAND_CLASS_BASIC_V2
2
Highest granted Security Class
COMMAND_CLASS_SWITCH_BINARY_V2
2
Highest granted Security Class
COMMAND_CLASS_CONFIGURATION_V4
4
Highest granted Security Class
COMMAND_CLASS_ASSOCIATION_V2
2
Highest granted Security Class
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
3
Highest granted Security Class
COMMAND_CLASS_VERSION_V3
3
Highest granted Security Class
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
2
Highest granted Security Class
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
1
Highest granted Security Class
COMMAND_CLASS_POWERLEVEL_V1
1
Highest granted Security Class
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
5
Highest granted Security Class
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
3
Highest granted Security Class
COMMAND_CLASS_MULTI_CHANNEL_V4
4
Highest granted Security Class