Enerzen LB-444 - Air Flow is Restricted or Reduced

8
broken, the plate(s) will require replacement. Ensure maintenance
procedures required for the LB-444 air purifier plate have been
performed. You should order new plates from your dealer.
 Do not attempt to disassemble the unit, due to the Limited Warranty of
the product.
⑶. It is normal that the LB-444 air purifier plate is making a sound, having a
burning smell, and/or appearing arcing or sparking.
⑷. What are the most typical application problems?
 Symptom: A belief that the proper equipment is placed in the
environment and the equipment appears unsuccessful.
Problem: Lack of air movement, improper placement of the unit.
 Symptom: Strong odors still remain in the environment after placement.
Problem: Lack of ozone, improper placement of the unit.
 Symptom: A strong odor of ozone is in the environment.
Problem: Too much ozone accumulation in the environment, as a result of
improper purifier control setting, and / or lack of air movement.
 Symptom: Visual haze of smoke and / or particulate remains in the
environment.
Problem: Lack of ionization and / or air movement.
⑸. Unit does not operate
 Is the unit plugged in?
 Is the power cord fully inserted into the back of the unit?
 Are you sure the outlet is functioning normally?
 Is the unit turned on?
 Is the back grill installed properly to depress the safety switch forward?
⑹. Air flow is restricted or reduced
 Is the unit properly placed away from objects that may obstruct air flow?
 Are the filters and fan grill clean?