ENFORCER SD-7202GC-PEQ - User Manual

Installation Manual
Manual de instalación
Mode d’emploi
SD-7623-GSTQ
SD-7223GW-LQ
Includes English, Spanish, and French plates.
Incluye placas de inglés, español, y francés.
Comprend plaques en anglais, espagnol et français.
English ...................................... 2
Français ..................................... 8
Warranty/Garantía/Garantie ....... 12
Español ..................................... 5
Also Available ......................... 11
SD-7202GC-PEQ / SD-7202GC-PTQ / SD-7223GW-LQ / SD-7623-GSTQ
SD-7202GC-PEQ
SD-7202GC-PTQ

ENFORCER SD-7202GC-PEQ Specifications

General

Model	SD-7202GC-PEQ
Type	Managed Switch
Speed	10/100/1000 Mbps
Power over Ethernet	Yes
Rack Mountable	Yes
MAC Address Table	8K
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Features	VLAN, QoS, IGMP Snooping, Port Mirroring
Humidity	10% to 90% (non-condensing)
Dimensions	440 x 44 x 330 mm
Layer	Layer 2
Jumbo Frame	Yes, up to 9216 bytes

Summary

ENFORCER Pushbutton Request-to-Exit Plates

Model Range and Features

Overview of different models (SD-7202GC-PEQ, SD-7223GW-LQ, etc.) and their key features.

Technical Specifications

Detailed technical specifications including voltage, current, dimensions, and operating temperature.

Included Components

List of parts and accessories included in the product package.

Message Plate Installation

Step-by-step guide for changing the message plates on the pushbutton.

Wiring: SD-7202 GC-PEQ & SD-7223 GW-LQ

Wiring instructions for the SD-7202GC-PEQ and SD-7223GW-LQ models.

Wiring: SD-7202 GC-PTQ

Wiring guide for pushbutton plates featuring a timer module.

Wiring: SD-7623-GSTQ

Instructions for wiring pushbutton plates with LED status indicators.

Related SECO-LARM Products

Overview of other available security products from the manufacturer.

Warranty and Notices

Information on product warranty, disclaimers, and copyright.