General
These instructions are designed to describe replacement of the original base machine
joystick with the joystick supplied with the engcon DC2. It is important that the joysticks
are used together with engcon DC2 for the Declaration of Incorporation in the installation
instructions to be valid.
In addition to these installation instructions, you must study and understand the safety
information applicable to the base machine concerned, as well as any other equipment
involved.
Do not attempt to install, use or maintain your tiltrotator/rotator and its supplied equip-
ment before reading and understanding all information about the tiltrotator/rotator,
its supplementary equipment and the base machine. Pay particular attention to the
safety information.
WARNING!
Other safety instructions are found in the engcon DC2 instruction manual.
WARNING!
To Next Page
Loading...
Need help?
General
