2 Symbols in the installation instructions
1�3 The environment
Symbol Description
WARNING
Risk of personal injury and/or property damage
Read the accompanying documentation for more information.
No/Incorrect measure
Yes/Correct measure
engcon's tiltrotators comprise at least 99 per cent recyclable material. engcon makes
constant eorts to reduce its environmental impact.All assembly and/or service work
must take place in compliance with applicable legislation and ordinances within the en-
vironmental, health and occupational safety areas. This includes all work, handling, stor-
age and processing of residual materials.
Spillage must be avoided and taken care of when it occurs to prevent pollution of soil and
water.
Note that hazardous waste may only be handled by people so authorised. All waste pro-
duced must be taken care of in compliance with applicable legislation and ordinances:
• Metallic materials must be recycled.
• Hydraulic hoses are normally used for energy recovery (sort as hazardous waste).
• Oils and greases are normally used for energy recovery (sort as hazardous
waste).
• Electronic components must be recycled for materials (sort as hazardous waste).
• Packaging to be source sorted and recycled for materials.
• Paper to be source sorted and recycled for materials.
If in doubt, contact the environmental manager at engcon.
To Next Page
Loading...
