1 Safety directives
1�2 Safety checklist
1�1 General
It is of the utmost importance that you
study andunderstandallthewarningtexts
before beginning to install/use the engcon
DC2.Thewarningtextshighlightpotential
risks and how to avoid them.
If in the slightest doubt, contact your em-
ployer or supplier.
Remember: a great many unnecessary
risks can be mitigated through sound judge-
ment and knowledge of the machinery. The
intended operator should therefore set
aside time to learn how to safely handle the
engcon DC2 before the machine is used.
Crushing risk from moving parts. Risk
of personal injury.
WARNING!
If you have the slightest doubt concern-
ing your knowledge or work regarding
safety details, contact your dealer or
engcon Sweden.
WARNING!
Check that the function decal matches
the machine functions before com-
mencing work. Risk of personal injury.
WARNING!
Defective or damaged equipment can
cause personal injury, damage to the
environment and/or property damage.
Ensure that service and maintenance
are carried out as recommended.
WARNING!
Neverattempttoincreasethemaximum
capacityoftheequipmentbymodica-
tions not approved by the supplier.
WARNING!
Replace damaged and/or illegible de-
cals and warning signs before the ma-
chine is used. Risk of personal injury.
WARNING!
Maintenance and repair of the electri-
cal system may only be carried out by
professionallyqualiedpersons.
WARNING!
Assembly and installation may only be
carried out at a workshop authorised by
the supplier. Changes to the assembly
may not be carried out without the man-
ufacturer’s consent.
WARNING!
To Next Page
Loading...
Need help?
General
