47
packets going to your WAN port IP address to a particular IP address in your LAN. The
difference between the virtual server and the DMZ function is that the virtual server re-directs
a particular service/Internet application (e.g. FTP, websites) to a particular LAN client/server,
whereas DMZ re-directs all packets (regardless of services) from your WAN IP address to a
particular LAN client/server.
Enable DMZ: Enable/disable DMZ
LAN IP Address: Fill-in the IP address of a particular host in your LAN Network or select a
PC from the list on the right that will receive all the packets originally from
the WAN port/Public IP address.
Click <Apply> at the bottom of the screen to save the above configurations.
To Next Page
