83
Remote managemen
t
This allows you to designate a host in the Internet the ability to configure the Router from a
remote site. Enter the designated host IP Address in the Host IP Address field.
Host Address: This is the IP address of the host in the Internet that will have
management/configuration access to the Router from a remote site. If the
Host Address is left 0.0.0.0 this means anyone can access the router’s
web-based configuration from a remote location, providing they know the
password.
Port: The port number of the remote management web interface.
Enabled: Check to enable the remote management function.
Click <Apply> at the bottom of the screen to save the above configurations.
To Next Page
