After 1st 50 hrs. (2500
km or 1500 miles)
Every 100 hrs. (5000
km or 3000 miles)
Every 200 hrs. (10,000
km or 5000 miles)
Every 400 hrs.
(20,000km or 12,000
miles)
Every 800 hrs. (40,000
km or
24,000 miles)
Check engine oil level and top up if
necessary
Check engine coolant level and top up if
necessary with correct mixture
Check visually for oil, fuel or coolant
leaks
Check all instruments, controls and
warning lights. Check hot and cold start
functions
Check coolant, oil, fuel, exhaust and
vacuum hoses/pipes for leaks, damage,
deterioration and correct routing. Check
all visible electrical wiring for security,
correct routing and evidence of chafing
or heat damage.
Change engine oil and renew oil filter
Check belt condition and replace if
necessary
Check fuel filter element and renew as
necessary
Renew air cleaner element
Spark plugs clean and inspect
(Replace every 3,000 hours)
Check all nuts & bolts for tightness
Clean coolant filler cap and renew cap if
seal has deteriorated
Lubricate PTO bearings if equiped
RECOMMENDED MAINTENANCE SCHEDULES
*It is recommended that this operation is carried out by an authorized EDI
Distributor. Depending upon the quality of the fuel used, it may be necessary to
renew the filter element more frequently.