Engine distributors RSG 862 - SPECIFICATIONS; GENERAL SPECIFICATIONS; FUEL SYSTEM; LUBRICATION SYSTEM

38
SPECIFICATIONS
GENERAL SPECIFICATIONS
Engine Type:
V-8, 16 valves, 4 Stroke spark ignition 90˚ Overhead
Valve (OHV) chain driven camshaft operating the valves
via roller cam followers and hydraulic lash adjusters.
Liter/CID:
6.2L / 379 CID
Bore: mm (inch)
102 (4.02)
Stroke: mm (inch)
95 (3.74)
Number of Cylinders:
8
Compression Ratio:
9.8:1
FUEL SYSTEM
LPG Fuel Specification:
Liquefied Petroleum Gas
Fumigation
EN589 (European) HD-5 USA
NG Fuel Specificaiton:
Natural Gas
Fumigation
1050 btu/ft^3 / 38.7 MJ/m^3 (UK)
11" H20 into DEPR
Gasoline Fuel Specifiation:
Gasoline (petrol) Unleaded 87 or 89 Octane (Gasoline
blends not to exceed 10% Ethanol by volume Octane
Index of 87 or 89).
Gasoline Fuel Pump
Pressure:
45 psia (~30psig at the rail)
LUBRICATION SYSTEM
Max. Oil Pressure:
Hot @ 2500RPM: 275.79 - 413.69 kPa (40-60psi)
Oil Type:
Super Premium SAE 5W-30
Service Oil Fill Capacity
(including filter):
7 quarts (6.6L)
Oil Filter:
Ford Service Part #: F1AZ-6731-AD
Motorcraft: FL820-S
COOLING SYSTEM
Thermostat:
Type: Wax Element
Starting Opening: 192˚F (88.9˚C)
Fully Open: 212˚F (100˚C)
Coolant:
50% Motorcraft Super Plus 2000 plus 50% clear water
Ford Specification: WSS-M97B44-D or ESE-M97B44-A