Table of Contents
page
Introduction
Features and Functionality at a Glance
Contents
Front Panel Features:
Rear Panel Features:
Troubleshooting
Technical Data,
Tube Map, Tube Exchange Service
Wiring of Principal Connectors
Note:
:
Handling and Care
Input; Channel 1 - Clean & Channel 2 - Crunch Control Features
Power Amp section: P.T.M. Display, Presence, Depth Punch
Channel 3 - Lead (3) & Channel 4 - Lead (4) Control Features
Middle-boosted (button), Channel selection
Stand By, Power
Poweramp Output 4, 8, 16 Ohms
Poweramp Output: speaker options
Power Amp section: Master A/B
Mains, Mains Fuse
S.A.C. Port for Z-9, Footswitch Ports
Detailed Specifications and Ratings
You'll find an ancillary pamphlet accompanying this owner's manual entitled
Instructions for the Prevention of Fire, Electrical Shock and Injury. Be sure to read it
before you plug in and power up the amp!
Technical specifications are subject to change without notice.
Noise Gate: Threshold Level
FX Loop: Send, Return, and Balance
Remote Control Options
Configuration table for Z-9 settings
CAUTION! Please read and heed the following:
Front Panel Diagrams for Noting Settings
4
5
6
6 - 8
8, 9
9 - 11
11, 12
12, 13
13
14
14, 15
16
17
17
18
18, 19
19, 20
21
22
23
23
24, 25
26
3
To Next Page
Loading...
