10
2.6 Data Recording and Software Installation
This sound level meter is able to record data in its internal memory.
Before you can record data, you need to install the SmartLogger
software on your PC. The latest version of this software and
detailed instructions on how to install and use it can be found at
https://ennoLogic.com/eS528L A CD with the software is included
for your convenience, but we recommend downloading the latest
version at the ennoLogic website.
To setup for a recording, connect the meter to a PC via the Micro
USB port located on the right side of the unit, behind a protective
cover which opens at the top. Then setup the instrument using the
SmartLogger software.
To reduce power consumption while data is being logged, if the
backlight is on it will turn off automatically after 2 minutes without
a button press.
When the memory is full or reaches the specified number of
samples, the meter will automatically turn off. The “FULL”
indicator will be displayed when the memory is full.
To Next Page
Loading...
Need help?
General