enorossi EASY RAKE 10 - Ec Declaration of Conformity

Machine Directive and harmonized standards
The EASY RAKE pull-type are designed in accordance with the provisions of Machine
Directive 2006/42/EC and in Directive 94/20/EC and particularly it satisfies the following
Harmonized norms::
EN 13854:2020 Safety of Machinery – Minimum gaps to avoid crushing parts of the body
EN ISO 4413:2012 Pneumatic fluid power - General rules and safety requirements
for systems and their components
EN ISO 4254-1:2015 Agricultural machinery - Safety - Part 1: General requirements
EN ISO 4254-10:2010 Agricultural machinery - Safety - Part 10: Rotary tedders and
rakes
ISO 11684: Tractors, machinery for agriculture and forestry, powered lawn and garden
equipment – Safety signs and hazard pictorials – General principles (1995)
EN 12100:2010 Safety of Machinery - General principles of design - Risk assessment and
risk reduction
EN 12965:2020 Tractors and machinery for agriculture and forestry. Power take-off (PTO)
drive shafts and their guards. Safety
EN 13857:20208 Safety of machinery – Safety distances to prevent hazard zones being
reached by lower limbs
ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden
equipment - Operator's manuals -- Content and presentation
All rights are reserved. It’s forbidden reproducing or coping any parts of this manual, in
any form, without the explicit permission signed by ENOROSSI. The contents of this
manual can only be modified by the Manufacturer and without notifying the Customer.
EC DECLARATION OF CONFORMITY
(All.IIA Direttiva Macchine 2006/42/CE)
The Manufacturer ENOAGRICOLA ROSSI s.r.l.
Headquartered at via Cortonese, 36 - 06019
Calzolaro di Umbertide (PG) - Italy
Declares under its sole responsibility that the machine
the functions of which are described in this manual
is conform to the Essential Requirements of Safety and Health Protection, as
per Machinery Directive EC/2006/42 and to the Directive EC/94/20 relating
to the mechanical coupling devices of motor vehicles and their trailers
and their attachment to those vehicles
EN 13854:2020 - EN 4413:2012
EN ISO 4254-1:2013 - EN ISO 4254-10:2010 - ISO 11684 (1995)
EN 12100:2010 - EN ISO 12965:2020 - EN ISO 13857:2020 - ISO 3600:2015
We hereby authorize Enorossi
Via Cortonese, 36 - 06019 Calzolaro di Umbertide (PG) - Italy
to draw up the respective Technical Dossier
GIOVANNINI ADELMO
Calzolaro di Umbertide, …….. ….……………………….
Legal Representative
EASY RAKE
………………………………………………………………………………………….
Generic denomination and commercial name
ER
…………………………..
Series/Model
………..
……………………………………………
Serial number
20..
…………….
Construction year