Enovation Controls PowerView PV480 - Date and Time Settings

Section 78 00-02-0830
2013-03-08 - 14 -
Date Setting: Use the UP/DOWN soft keys and stop the cursor (. .) next to the action item
Date. Press the select ( ) soft key to initiate change to the month value. Use the (+/–) soft
keys to increment or decrement the number. Use the DOWN arrow to reach the day value and
year value and the +/– soft keys to make changes.
Time Setting: Use the UP/DOWN soft keys and stop the cursor (. .) next to the action item
Time. Press the select ( ) soft key to initiate change to the hour value. Use the (+/–) soft
keys to increment or decrement the number. Use the DOWN arrow to reach the minutes value
and the +/– soft keys to make changes.
NOTE: A reboot is required for changes to the Date Setting to take effect.