enphase Ensemble User Manual

Ensemble Commissioning: Installer Toolkit Communications
© 2020 Enphase Energy Inc. All rights reserved. July 24, 2020
___________Installer Initials: All steps complete on this page
2
 You can install the application using the below links
o iOS
o Android
 Enable Bluetooth communication on the smart phone or tablet you will use for commissioning.
 Turn OFF automatic sleep mode on your smart phone or tablet. This prevents your phone
from going to sleep and interrupting the Envoy firmware upgrade.
o In iOS, this setting is called “Auto Lock” and can be changed to “never” under
“display and brightness”
o In Android, this setting is called “screen saver” and can be changed to “never”
under settings, display, advanced display.
o After commissioning is complete, phone can be reset to automatic sleep.
 The Enphase Envoy must have software version 6.0.X or later for commissioning and
operation. You can update the Envoy software using Installer Toolkit.
 A system activation must be created to complete commissioning. This can be accomplished
beforehand using Enlighten Manager, or on site using Installer Toolkit.
o Creating an activation beforehand to save time in the field.
o If completing the activation on site, Installer Toolkit must have
Internet access (cell signal or WiFi).
 Before visiting the site, ensure that the Envoy software has been
downloaded to the phone.
o The Settings tab in Installer Toolkit has an Envoy Software section
with an Update Now button for downloading Envoy software.
o Users will see two versions of Envoy software. Installer Toolkit will
automatically select the right version for Ensemble or PV only sites.
o A stable WiFi connection is required to successfully download the
software. Do not move the phone around or step out of WiFi range
while downloading the software.
 Informative notes:
o Encharge batteries ship with approximately 30% state of charge.
o Encharge batteries ship with “self-consumption” as their default
mode.
Commissioning Instructions
Date and time of commissioning start: _____________________________________________
Address: ____________________________________________________________________
System being commissioned: ___________________________________________________
Legacy Installer Toolkit 2.0
(not used with Encharge
storage systems)
New Installer Toolkit 3.0
(used with Encharge
storage systems)

enphase Ensemble Specifications

General

Brand	enphase
Model	Ensemble
Category	Inverter
Language	English