Page 22 of 34 EN109-1631750-48 IFU
Storing a Protocol
Prior to the execution of a modified protocol or manual setting, it can be saved for later use under
Favorites.
• Push the icon [9] to store
the settings
Select a program number via
the icon.
Push OK to confirm and to
return to the previous menu
Notes:
• Program number 0 is the
default start up setting.
• You can extend the name
of the program with your
own terminology
• Push the icon Favorites
Select a program via the
icon.
• Place the applicator on the
treatment area (with gel).
• Contact control indicator
turns off and the treatment
time will start (countdown
starts)
If there is insufficient contact,
the indicator will light up and
treatment time will interrupt.
To Next Page
Loading...
Need help?
General
