Page 8 of 34 EN109-1631750-48 IFU
5 Installation
Inspection
In case of damage from transport is noticed, contact your local distributor.
DO NOT USE the device!
Immediately upon unpacking the device, perform the following steps:
• Verify the delivery documents to make sure that the delivery is complete.
• Verify that the packaging contains all the items listed in the standard accessories list
• Check the external components and accessories for possible damage due to transport.
Mounting the ultrasound head holder
Ultrasound head/applicator holder can be mounted on the right or left of the unit. Follow the
instructions given in the 0167.278 Information sheet - Mounting US Head Holder Sonopuls 190.
Connection to mains supply
Use of any other cable other than the supplied cable is strictly PROHIBITED as it
affects patient safety and the proper function of the device.
Do not place the device in a location where the power cord could be tripped over or pulled
out during treatment!
Do not attempt to use the unit if it is not properly grounded. Make certain that the unit is
electrically grounded by connecting it only to a grounded electrical service receptacle that is
in
conformity with the applicable national and local electrical codes regarding medical
environments.
Insert the mains cable into socket [5] and connect it to a wall socket.
Connect the applicator on socket [7] or [8].
To Next Page
Loading...
Need help?
General
