ENSONIQ SQ-R User Manual

Section 6 - Standard Sound Programming
SQ-R Musician's Manual
Mod Source
Mod Amount
Volume Modulator — Selects one of the 15 available modulators to affect the
volume of die voice. This is in addition to the Amp envelope, which is always
routed to volume.
Volume Modulator Amount — Determines how much the modulator selected
above will affect the volume of the voice.
Range: -99 to+99
The two parameters on the lower line of the display provide a powerful tool for
shaping the volume of the sound across the keyboard:
KeybdScale/KeyRange
Output Bank
KevbdScale
KeyRange
Keyboard Scale Amount (or Zone) — Can be used to fade the voice in or out
between the two keys specified to the right (see below). This is good for doing
keyboard crossfades between voices, or for reducing the volume of a particular
voice as you go higher up the keyboard. A value of +99 will fade the voice in x
from silence to full level between the low and high keys. A value of -99 will fade
the voice out from full level to silence between the low and high keys.
Intermediate values will scale the voice from full level to an intermediate level.
When set to ZONE, the voice will sound at an even level between the low and
high keys. There will be no sound below the low key or above the high key.
Low and High Key — Sets the key range over which the fade-in, fade-out or
keyboard zone will occur. When this parameter is selected, notes can be entered
from the keyboard (with EditKeyrange=ON in System bank) or using the
Up/Down Arrow buttons. Select this parameter and play the low key; that
note is entered as the low key, and the cursor switches to the high key. Now play
the high key; that note is entered as the high key, and the cursor disappears. If
you made a mistake, or want to enter a different range of values, just select the
parameter again and repeat the process.
6 - 30
Output Bank

ENSONIQ SQ-R Specifications

General

Brand	ENSONIQ
Model	SQ-R
Category	Synthesizer
Language	English